Zolkit

Video Remix

Turn your footage into fresh combinations. Choose your clips, set the rules, and let the remix begin.

Local processing · Your files stay on your device
0 / 30 · 0.0 MB

Output queue

0 / 0

Set your rules, then generate. Your videos will appear here.

Local processing · Your files stay on your deviceMP4 · H.264 · 720p · 30 fps

FROM FOOTAGE TO FINISHED VIDEO

Random video montages, made from your own footage

Zolkit’s Video Remix is a browser-based random video montage maker. Import local footage, choose the target duration, output count, aspect ratio and music, and let the tool automatically arrange sources and cut lengths into MP4 videos to preview, download and publish yourself. Use it to create variations from product footage, travel clips or event highlights that work as independent shots.

  • Automatic source and cut planning for your target duration
  • Four aspect ratios with crop or padding
  • Independent original and music volumes
  • Individual MP4 or batch ZIP downloads

Make your first montage in three steps

  1. Import and curate your footage

    Drop videos into the central area or choose files. Add footage to start. Click a source to preview it, use Add media for more files, or Clear library to start over. Selecting videos starts preparing the engine in the background. Keep shots relevant to one subject so random combinations make sense.

  2. Set the rules and try one output

    Set Videos to generate to 1 for a first test. Choose the target duration, aspect ratio and crop or padding. The tool automatically arranges sources and cut lengths. For music, upload audio, drag the highlighted waveform range and preview the selection.

  3. Review, then generate and download more

    Select Generate videos in the top toolbar. Open a task to see its queue state, rendering percentage or finished preview. Check framing and sound before increasing the batch size. Download a single MP4 or use the green ZIP button for all finished outputs.

Set the target duration and let the tool arrange the cuts

The tool shuffles sources, automatically plans cut lengths and keeps joining footage until it fills the target duration. Sources can be reused, and short footage can loop inside a cut. There is no source-count or maximum-clip-length setting to configure.

  1. Source count is automatic

    The library is shuffled and sources are used in that order, one source per cut. After every source in a round has been used, the library is shuffled again. If the target is reached earlier, the output uses only part of the library.

  2. Each cut is randomly assigned 4–8 seconds

    The current automatic rule assigns each cut 4 to 8 seconds. There is no maximum-clip-length field to fill in. Inputs do not have to be 4–8 seconds long, and the final cut may be shorter than 4 seconds.

  3. Long footage is trimmed; short footage loops from the beginning

    If a source is long enough, a random valid starting point is chosen. If it is shorter than its assigned cut, it loops from the beginning to fill that cut. Even a 2-second source can therefore form a longer segment.

  4. The target duration determines when to stop

    Each cut reduces the time remaining, and the final cut uses only that remainder. Plans align to output frames at 30 fps. Frame timing and audio encoding can introduce a small difference in the exported file duration.

  5. Every output gets a new random plan

    Each batch output reshuffles sources and chooses fresh cut lengths and start positions. The same source can still appear on both sides of a round boundary, and random plans do not guarantee entirely different footage in every output.

An example: 3 sources → three 60-second videos

Import 3 videos, set the target to 60 seconds and generate 3 outputs. The tool handles the remaining editing rules. One output might take the sequence below from A, B and C, returning to them as needed to fill the target. The next output gets its own random plan.

Illustrative sequence, not an actual result. These 8- and 7-second example cuts total 60 seconds; actual lengths are automatic.

Sources can loop to fill the target. This does not create new scenes, understand the footage, cut to music beats or add transitions. Use longer source footage or a shorter target if you want less repetition.

SettingRange and defaultEffect and advice
Target duration1–180 seconds; default 60Sets the output’s target length. The final cut is shortened to fit. Try 30 seconds first; longer outputs usually take more processing time.
Videos to generate1–10 outputs; default 3Each output gets a fresh random source and cut plan. Larger batches generally take longer and retain more results in memory. Random generation does not guarantee entirely different videos.

Choose the canvas, then decide what to crop

The ratio buttons show the shape of your output. Match the intended viewing format, then check subjects, captions and frame edges in the finished preview. Platform names below describe common uses, not automatic publishing or approval guarantees.

RatioCommon useExport dimensions
9:16Vertical clips for Reels, TikTok or Shorts720 × 1280
16:9Landscape presentations and YouTube videos1280 × 720
1:1Square social posts720 × 720
4:5Portrait social feed posts720 × 900

Fill and crop

Fills the output canvas and crops excess from the center. Use it for centered subjects when you want no black borders. Text or people near an edge may be cut off.

Fit with black borders

Keeps the whole source frame and adds black padding where the ratios differ. Use it when captions, a screen recording or details near the edges must remain visible.

Find your music on the waveform, then balance the sound

After you upload music, the highlighted waveform range shows the section to use. Drag it left or right to choose a start; its length follows the target video duration. Shorter audio uses the available length. The soundtrack covers the finished video rather than assigning separate music to each shot.

Keep the original sound

Leave background music empty and original volume at 100%. This suits atmosphere or commentary. Source clips without an audio track remain silent.

Replace original audio with music

Set original volume to 0%, add music and preview the highlighted range. This suits product shots or travel footage where the original sound is not needed.

Mix both tracks

Adjust the original and music volumes independently. Start with quieter music when commentary matters, then listen to the completed output. The tool does not detect speech and automatically duck the soundtrack.

If the music is shorter than the output, enable looping to fill the duration. Without looping, the remaining soundtrack is silent after the music ends; original audio still follows its own volume setting. Selection preview checks the music passage. Listen to the finished video to judge the final mix.

Know when to wait, review, retry or download

Queued / Rendering

Outputs are processed one at a time. Selecting a queued task shows its waiting state; selecting a rendering task shows its current percentage. A finished video cannot be played until rendering completes. Keep this page open.

Ready to download

Play the finished video and download its MP4. The green ZIP button shows the completed count and includes only finished outputs. You can save completed videos while the rest of a batch is still running.

Cancelled / Failed

Cancel stops the current and remaining tasks while preserving completed results. Regenerate adds a fresh random task using the current library and current settings; it does not overwrite the old output.

Practical limits to know before you start

Input size
Up to 30 videos, with 500 MiB combined video and music (shown as 500 MB in the interface). Start with browser-readable MP4 videos and audio such as MP3 or WAV. Support also depends on the codecs inside each file.
Export format
MP4 with H.264 video and AAC audio at 30 fps, using the dimensions in the ratio table. No tool watermark is added. There are no 1080p, 4K or custom bitrate controls.
Processing and saving
Video and music are processed by an FFmpeg-based engine in your device’s browser, not uploaded to a video-processing server. Selecting videos prepares the engine in the background. Downloaded engine assets are cached by version for reuse; cleared browser storage requires another download. Jobs and results still last only for this page session, so download before closing or refreshing.
Platform workflow
This version imports local files only. It does not download Facebook, TikTok, YouTube or Instagram links or connect accounts for automatic publishing. Download and publish manually, using footage and music you have permission to use.

If something goes wrong, try this first

A file will not import

A file extension does not guarantee codec support. Try a small MP4 that plays in your browser. Remove damaged files or convert them to a compatible MP4 before trying again.

Processing is slow or fails

Try one output, a shorter duration and smaller inputs first. Browser memory and device performance matter even below the size limit. Preparing the engine for the first time requires downloading its assets; later visits can reuse the browser cache.

Shots repeat or captions get cropped

Repetition comes from taking more cuts from the same footage: use longer sources or a shorter output. For missing frame details, choose Fit with black borders. Use a manual editor when each shot needs a specific composition.

The music passage or mix sounds wrong

Drag the waveform range to another passage and preview it. Lower music volume or mute original sound if needed. Changing controls does not change existing outputs: generate again to hear the new mix.

Video Remix questions, answered

How is a random video montage different from merging videos?

Video Remix randomly chooses source files and cut positions according to your rules, making it useful for generating variations from a library. A video joiner is more suitable for joining chosen clips in a fixed order. Use Zolkit’s Video Joiner when that order matters.

Do I need to upload footage or create an account?

Zolkit’s Video Remix works without registration. Media is processed in the current browser, not uploaded to a video-processing server. The page loads a processing engine, and jobs and results do not persist across page sessions. Download before closing or refreshing.

Do I need to choose a source count or maximum clip length?

No. Video Remix automatically arranges source order, cut positions and cut lengths for your target duration. Short footage or insufficient total footage can be reused automatically, and the final cut fits the remaining time.

Is every randomly generated video guaranteed to be different?

No. Each output receives a fresh random source and cut plan, but short files, a small library and the same target duration can produce overlapping footage. Random editing also does not guarantee originality or acceptance by a publishing platform.

How do I make vertical videos for Reels, TikTok or Shorts?

Choose 9:16 to export a 720 × 1280 MP4. Select fill-and-crop or fit-with-borders and check subjects and captions in the finished preview. Download the video and publish it to the platform yourself.

Can I resize the music selection independently?

The music selection currently follows the target video duration; its edges cannot be resized independently. Drag the selection to change the start. Changing the output duration adjusts the range automatically, and shorter music can loop to fill the video.

Is Video Remix free, and does it add a watermark?

Zolkit’s Video Remix is free to use and does not add a tool watermark to exported MP4 files. Exports use fixed H.264/AAC encoding at 30 fps and the dimensions for the selected ratio. There is no paid resolution upgrade or custom bitrate control.

Will clearing the library or cancelling delete completed videos?

Clearing sources and cancelling the queue preserve finished outputs for preview and download. Clear results removes the results from the page. Closing or refreshing also ends the session, so save files first.

Does the processing engine preload and stay cached locally?

Selecting video files starts preparing the FFmpeg engine in the background. Its code and WebAssembly assets are cached by version in the current browser, with integrity checks, and the ready engine is reused within the page. Media files are not included in this cache. Browsers may evict stored assets; if storage is disabled the engine can still load normally. This is not a permanent offline installation.